Salt Creek Bridge is the only surviving pure Warren truss covered bridge in the United States. Although the Warren truss, patented in 1848, was originally designed as a timber/iron truss, it did not become popular in American until after 1860 with its development in an all-metal version. By the late nineteenth century, it was one of the two most popular truss types for metal bridges, the Pratt truss being the other.

The Salt Creek Covered Bridge spans Salt Creek ten miles east of Zanesville in Muskingum County, Ohio. The bridge is built on the now rare Warren truss plan said to have been invented by Russell Warren of Rhode Island in the 1850's. No patent was ever issued to Mr. Warren for this truss, but drawings of it do exist. A Warren truss used in iron bridges was patented by James Warren, an Englishman, in 1848, giving rise to some controversy over the origin of this truss plan. The Warren truss was never common and there are now only three left here in Ohio, all privately owned.

In the early nineteenth century Christopher Shuck established a saw mill near this site on Big Salt Creek. By 1875, James S. Johnson owned and operated the mill. Arch Hill Road was laid out an unknown date prior to 1833, when it appears in a somewhat different alignment on Wyllys Buell's map of Muskingum County. No documentation has been found concerning a previous bridge at this site, and county records suggest that there was a ford at this location until 1875, when a group of local citizens petitioned the Muskingum County Commissioners for a bridge "over Big Creek near Jas. Johnson's saw mill." The county commissioners approved the request and, in June 1876, awarded the masonry contract to Jesse Romine and the superstructure contract to Thomas Fisher. The bridge was completed in the fall of 1876. County records show payments totaling $746.00 to Fisher and $556.22 to Romine.

Salt Creek Bridge carried traffic for seventy-seven years. In 1953, the county realigned a major curve in the road and bypassed the covered bridge, erecting a steel pony truss bridge just upstream. In exchange for the right-of-way, the county gave the covered bridge to an adjacent landowner who used it as a storage shed for farm machinery. In 1960, the Southern Ohio Covered Bridge Association purchased the bridge in order to preserve it. Shortly after acquiring the bridge, a group of volunteers replaced the original shake roof with corrugated metal. While this was a positive step, the structure was already deteriorating from moisture and dry rot. In 1983, the ends of the lower chords were replaced. This project, however, inadvertently led to further damage and did nothing to address previous structural problems. In 1997-98 the association, by now renamed the Ohio Historic Bridge Association, undertook a major rehabilitation project with a $54,000 ISTEA grant. The bridge is now in an excellent state of repair and is maintained as an historic landmark and tourist attraction.

The Salt Creek Bridge was bypassed by the county in 1953 and used by a farmer as storage for machinery. In 1960, the old bridge was bought by the Southern Ohio Covered Bridge Association. They have renovated the old structure and keep it in excellent condition. An interesting feature of this bridge is the metal roof sheets which replaced the original shingle roof. Members and friends of the Southern Ohio Covered Bridge Association donated money for one or more of these sheets and the names of the donors are stenciled on each sheet where they can be easily read from inside the bridge. On October 21st, 1962, an Ohio historic site marker was dedicated during ceremonies at the bridge by the Ohio Historical Society. This marker honors the builders of all Ohio covered bridges. Each year in July, the Salt Creek Bridge is the site of the annual picnic of the Southern Ohio Covered Bridge Association.

Bridge Description

Salt Creek Bridge is a single-span timber Warren truss covered bridge on cut stone abutments. The length of the truss is 83'-0", with a clear span of 70'-0". The housing extends about 2' beyond the ends of trusses, making the overall length of the bridge approximately 87'. The bridge is 14'-0" high from the top of the upper chord to the bottom of the lower chord and 14'-0" wide overall, with a roadway width of 11'-6" feet.

Each truss is composed of eight panels approximately 10' wide. The upper chord is two 7"x7" timbers scarfed along its length and bolted together. The lower chord is two 6"x12" timbers scarfed and bolted together. Vertical end posts and a series of diagonal timbers (6"x8" in the four center panels, 6x9" at the two panels at each end) connect the upper and lower chords. The tension members, angling up towards the ends of the bridge, pass through the chords where they are notched and bolted through the chord with a 4" diameter threaded bolt fastened with a nut. The compression members, angling down towards the ends of the bridge, are notched into and braced against the tension diagonals at their upper and lower ends.

The lower chords of the bridge rest on large bed timbers on top of the abutment facewalls. Transverse 6"x10" wooden floor beams are seated on the lower chords at each panel point. There are thirteen lines of stringers laid longitudinally on top of the floor beams. Two-inch thick, rough-sawn, variable-width plank flooring is laid diagonally on top of the stringers. Lower lateral bracing consists of 2 72"x6" members bolted to the underside of the floor beams.

The upper lateral system is composed of 7"x7" transverse tie beams seated on the upper chord at each panel point. There is 2"x6" diagonal bracing crossing between the tie beams. This bracing is placed above the tie beams and is nailed to the outer ends of the beams. There are 3"x4" wooden sway braces between the diagonal members of the truss and the tie beams; these braces are nailed to the truss and bolted to the tie beams. There is a longitudinal member (possibly 4x6") seated on the outer ends of the tie beams to support the rafters (approximately 2"x4', spaced at 18"). The gable roof has a slight overhang and is covered with standing seam galvanized metal roofing fastened to wooden purlins on top of the rafters.

Stained, variable-width (1x12" typical) vertical board sheathing covers the exterior of the bridge to about 1' below the eaves. The sheathing is fastened to 2x4" longitudinal nailers on the exterior faces of the trusses. The straight portals have board and batten siding and slightly arched openings. There are 5' shelter panels inside the openings at each end of the bridge.

The dry-laid stone abutments and wingwalls are built of large squared blocks of granite and appear to be original. The wingwalls extend back at an angle along the approaches to the bridge.

In 1848, James Warren and Theobald Monzani patented the Warren truss in England. A year or two later, American civil engineer Squire Whipple (1804-1888) gave this type of truss its first practical application in the United States. The Warren truss has parallel upper and lower chords with inclined web members sloping in opposite directions to form a series of triangles. The uniform size of the members made fabrication and erection economical, and the simple configuration allowed the diagonals to alternately carry tensile or compressive stresses under moving loads. Warren truss bridges of wood appear to have been limited to Ohio, where three covered bridges of this type survive.

Chronology

1875 Citizens petition Muskingum County for a bridge at this site.

1876 Salt Creek Bridge constructed.

1879 Salt Creek Bridge covered.

1953 Salt Creek Bridge bypassed; title reverts to adjacent property owner.

1960 Southern Ohio Covered Bridge Association formed to purchase Salt Creek Bridge.

1962 Salt Creek Bridge stabilized; original shake roof replaced with corrugated metal.

1983 Salt Creek Bridge repaired.

1995 Muskingum County reassumes ownership of Salt Creek Bridge to apply for funding.

1996 Ohio Department of Transportation awards $54,000 Intermodial Surface Transportation

Efficiency Act (ISTEA) grant for Salt Creek Bridge rehabilitation.

1998 Salt Creek Bridge rehabilitated; volunteers replace flooring and siding

South side and west portal of the bridge, looking southeast (1973)

West portal of bridge looking east (1973)

Perspective (2004)

Northeast (2004)

Due east (2004)

Portal elevation (2004)

Looking south. In foreground is a steel pony truss bridge built in 1953 to bypass the covered bridge (2004)

East portal (2004)

Western cut stone abutment and below deck detail (2004)

View out of eastern portal (2004)

South panel (2004)

Top chord. Note stenciled donor names (2004)